PFA connector
Introduction:
PFA tube is made from PFA resin and prepared by the technology of thermoplastic extrusion and blowing. It has non-sticking, heat-resistance, aging resistance, corrosive resistance, non-flammability and good electric property.It can be solid adhesive for PTFE and also a good adhesive for laminating various materials. Its working temperature is up to 260 and is an ideal material for circuit board and flat cable.

Note:

For our fast response ,pleasae kindly get contact with us directly by e mail, not leave message in web.

Usage :

PFA ( shrink) tube's usage :

Office-work machine 's roll packing
paper machine's roll packing
printing and dyeing machine's roll packing
printing machineroll packing
insulated jacket
the main insulation of rotor of the electric instrument
water treatment
make the magma sample in the field of oil field ect.
UV lamp protecting

PFA joint

1.customized as per client's requirement
2.thinest, smallest and precision parts produced
3.competitive price

Properties:

Working temperature: -80-260 centigrade

Flame retadant: V-0

Very low friction coefficient

Exceptional insulating properties

Extremely corrosion/chemical drug resistant

Industry Application:

Pipe coupling fittings

Valve disc/plate/bushing/sleeve

insulators/electric components

Pipe connectors/impeller/gasket

medical device parts

PFA valve seat,

PFA elbow

PFA tee coupling,

PFA valve spare parts

PFA tube fitting

PFA gasket

PFA washer,

PFA sealing ring

PFA valve seat

PFA ball valve seat

PFA injection products

PFA bush

FEP & PFA has perfect anticorrosive properties and heat resistance and electric resistance. they are widely used in the fields of electrical,petrochemical,industrial,IT industrial.They are the perfect material so making VU lamp protection tube, anticorrosice tube
PFA is both transparent to UV-A and UV-C light and totally resistant to it as well as being temperature resistant. Therefore ,it makes an excellent material for shatter proofing UV lamps used in the food industry where glass free areas are required. Other plastic voerings enbrittle or discolour under the effect of the UV radiation . If the lamp suffers damage ,the glass is contained in teh shrunk on jacket.
Linear Lamps of any Size.
Circular and other shapes.
Fitted boots for U shaped lampes.
Low light transmission loss
Loss of UVA AND UVC light is much less compared with other polymer coatings. For our usual coatings,loss of UVA is arround 4% and UVC is 11%.We know of no other suitable flexible coatings that provide less loss of UV.
Properties :
High low temperature resistance:
-200--260°C,high temperature strength is 2 times higher than PTFE
Good adhesive and heat sealability with PTFE:
Below melting point ,it won’t stick any project.Above melting point, it has perfect adhesive property with PTFE, Metal and self-adhesion(heat sealing).
None stick to water ,oil :water contact angle:θ=1150o
Electric reliability,High dielectric
60HZ-60MHZ,Under the high and low temperature,thepermittivitykeeps2.1even if the surface damaged ,it won’t has conductive track.
Volume resistance>1018ΩM
Surface resistance>2*1013Ω
Voltaic Arc Resistance>165sNo electric leakageWeather resistance:It can be used in sunlight and ozone long
Anti-corrosion:Only in high temperature, Fluorin and alkalis can effect it,others acid,alkali or ester won’t effect it.
Fireproof :If firing, and will still insulate .
High diaphaneity
UL-Resistance :Good penetrability in ultraviolet radiation,and lowest refraction coefficient

Technical index of PFA:

Plastic bag &carton . Customized is acceptable

Everyday new companies open, and companies die.

Most died companies was caused by the founders,including his bad management,his short dream and his attitude to the customers.

Mianyang Prochema Commercial Co.,Ltd. is not an old company,but will be a 100-year company,because his founder has that dream.

Founder himself can not live 100 years,but his spirit and attitude will.

Honest and responsible and insistant are the key points for a company to be existed long enough.

In China,real 100-year company is rare.Hope Mianyang Prochema will the one.

History:

2004--Mianyang Prochema established,initially in insulation and printing plastic film 

2007--Set up Gus Industry(hongkong)co.,limited for global business management

2008--Set up Shenzhen factory to produce the films and involved in conductive film and interactive touch screen

2010--Deeply involved in in-door advertising which is produced from the conductive film

2013--World wide promoting privacy PDLC switchable film and glass

Products and service catalogue:

1  FEP products

   Film , sheet, rod, tube, (heat shrink tube),adhesive tape,elbow etc

2.PFA  Products

    Film , sheet, rod, tube, (heat shrink tube), elbow etc

3.PCTFE Products

  Film , sheet, rod, tube, elbow etc

4.PVDF products:

  Film , sheet, rod, tube, (heat shrink tube),adhesive tape,elbow , PVDF PIEZO film and sensors etc

5.ETFE products

  Film , sheet, rod, tube, (heat shrink tube) 

6.Perfluorinated ion exchange membrane 

   N11x-VRB , N21x-Fuel cell, N31x-high fuel cell, N41x-electrolysis

7.PVDF PIEZO membrane and sensors

plastic piezo film and sensors . free size and free shape . 

8.PEEK products 

 Film , sheet, rod, tube and other products

9.Other products

 PTFE products, PVF products 

Professional services need the service providers to be professional. Different from many other companies

For more, please kindly get contact with us by following E   MAIL direclty